Options for ABB drives, converters and inverters
Quick installation and start-up guide
FEPL-02 Ethernet POWERLINK adapter module
Safety instructions
WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the
equipment can occur. See the user’s manual.
Mechanical installation
1. Pull out the lock.
2. Install the module carefully to an option
module slot of the drive. See the drive
hardware manual.
1
3
3. Push in the lock.
4. Tighten the screw to torque 0.8 N·m using
a Torx TX10 screwdriver.
WARNING! Do not use excessive force,
or leave the screw too loose. Over-
tightening can damage the screw or
module. A loose screw decreases the EMC
performance, and can even cause an operation
failure.
4
Electrical installation
Layout of the module
1
No. Description
1
2
3
4
5
6
Lock
Mounting and grounding screw
RJ-45 connector [X1]
RJ-45 connector [X2]
Diagnostic LEDs
MAC ID
6
5
2
ꢀꢁ
4
3
|
Nokia 5000 User Manual
Motorola V535 User Manual
Motorola MOTOQ9M VZW User Manual
LaCie 14B User Manual
Kenwood KDC W241 User Manual
HTC America Cell Phone HD7S User Manual
Emerson CKS2235 User Manual
Echo SC3305 70080 User Manual
Centon electronic DataStick Bolt 2GBDSB SILVER User Manual
Archos Cell Phone 50 User Manual