Belkin Network Card F5D4075 User Manual

Powerline AV+  
Networking Adapter  
User Manual  
PM01611  
F5D4075  
 
INTrodUCTIoN  
Table of Contents  
seCTions  
1
2
3
4
Thank you for purchasing the Powerline AV+ Networking Adapter (the Adapter). Most people don’t enjoy buying long and  
expensive Ethernet cables or pulling the cables from one place to another, but the Adapter offers one of the easiest ways to  
enjoy home or small-business networking. Users can now experience a total network solution with the Adapter. The Powerline  
AV+ Networking Adapter operates on the HomePlug® Powerline Specification 2.0 standard, providing up to 200Mbps*  
bandwidth over home AC wiring. Since the home power lines are the most pervasive medium in households with multiple  
outlets in every room, the Adapter allows multiple home desktop and notebook computers to be networked to share an  
Internet connection, printers, and files, stream video, and play games without any additional wiring. The advanced signal  
processing is capable of maintaining coverage throughout the entire house, even across different phase rings.  
The installation of the Adapter only requires that a 10/100Mbps Ethernet port is available on your device. This makes the  
Powerline AV+ Networking Adapter compatible with any device, including Mac®, Windows®, and UNIX machines. Note that you  
need at least two adapters to create a powerline network.  
For security, all HomePlug devices are equipped with 128-bit AES encryption. The private home power grid plus encryption  
makes HomePlug significantly more secure than competing technologies.  
The Powerline AV+ Networking Adapter provides the best solution for no-new-wires home networking. With easy plug-and-  
play installation, and the reliability of HomePlug Ethernet’s products, the Powerline AV+ Networking Adapter is the best  
solution for high-speed networking.  
Powerline AV+ Networking Adapter  
1
 
INTrodUCTIoN  
Table of Contents  
seCTions  
1
2
3
4
features  
Product specifications  
Up to 200Mbps* bandwidth over standard home power lines  
Computer Interface: IEEE 802.3/802.3u  
HomePlug signal easily passes through circuit breaker  
128-bit DES encryption ensures data security  
Encryption completed by hardware, without sacrifice to bandwidth  
Includes 3 IEEE 802.3 computer interface ports  
Plug-and-play installation  
Operating Temperature: 32–104 degrees F (0–40 degrees C)  
Storage Temperature: -4–176 degrees F (-20–80 degrees C)  
Humidity: Max. 5%–90% (non-condensing)  
*The standard transmission rate—200Mbps—is the physical data rate. Actual data  
throughput will be lower.  
HomePlug Powerline Specification 2.0-compliant  
Coexistence with HomePlug 1.0 and 1.0 Turbo networks  
Powerline AV+ Networking Adapter  
2
 
INTrodUCTIoN  
Table of Contents  
seCTions  
1
2
3
4
security led  
Blinking Blue  
Solid Blue  
Package Contents  
Encryption setting up  
Encryption setup successful  
Fail in encryption  
One Powerline AV+ Networking Adapter  
One Powerline AV Networking Adapter  
HomePlug Quick Installation Guide  
HomePlug User Manual (on CD)  
CD-ROM  
Double Flash  
Powerline link led  
Blinking  
Powerline data transmitting or receiving  
Link rate excellent: greater than 60Mbps  
Link rate normal: 30–60Mbps  
Link rate low: 0–30Mbps  
Color Blue  
Color Magenta  
Color Amber  
Off  
No activity  
ethernet link leds  
Solid Blue  
Limited Warranty Card  
10/100Mbps port linked  
No Ethernet link  
Off  
Two Power Cables  
Two CAT5/RJ45 Ethernet Cables  
Two Wall Plug Adapters  
system requirements  
At least 2 HomePlug devices  
Available Ethernet port on each computer or network device  
Available power outlet  
Standard home powerline wiring  
CD-ROM drive  
Powerline AV+ Networking Adapter  
3
 
INsTAllINg ANd seTTINg UP The AdAPTers  
Table of Contents  
seCTions  
1
2
3
4
overview  
hardware setup  
Installation of the Powerline AV+ Networking Adapter takes only  
seconds and does not require setting up long wires throughout  
the house. Simply plug the units directly into any available wall  
outlet and connect to any device with an Ethernet port. Users have  
the option to randomly change the security password for their  
powerline network.  
1. Plug your network cable into the device’s RJ45 network adapter port.  
2. Plug the other end of your network cable into the RJ45 port located at  
the back of the Adapter.  
3. Plug the power cable or wall adapter into the power connector  
at the back of the Adapter.  
4. Insert the power plug of your power cable or wall adapter directly into  
a power outlet in the wall.  
Note: do not plug the device into a UPs or power strip with surge  
protection as they may filter the powerline signal.  
5. Repeat this process for the second Adapter.  
Powerline AV+ Networking Adapter  
4
 
CoNfIgUrATIoN  
Table of Contents  
seCTions  
1
2
3
4
overview  
Changing the Network Password  
The Adapter uses 128-bit AES encryption to block access from  
the outside. By default, the protection is enabled. However, it is  
recommended that you change the default network password with the  
“Encryption” button located on the units.  
1. With both Adapters plugged into the wall, press the “Encryption”  
button on the first unit for 10 seconds. The password on  
this Adapter has now been changed to a random value.  
2. Next, press the “Encryption” button on this unit for more  
than 0.5 seconds, but less than three seconds.  
3. Within two minutes, press the “Encryption” button on the second  
unit for more than 0.5 seconds, but less than three seconds.  
4. The new network password has now been saved to  
the second unit. The password will not be lost, even  
if the Adapters are unplugged from the wall.  
Powerline AV+ Networking Adapter  
5
 
CoNfIgUrATIoN  
Table of Contents  
seCTions  
1
2
3
4
Adding Another Adapter to the Network  
Technical support  
You can find technical support information at www.belkin.com/support  
or www.belkin.com.  
1. If the default network password has been changed, a new Adapter  
will have to load the new password before it can join the network.  
2. Press the “Encryption” button on an encrypted unit for  
more than 0.5 seconds, but less than three seconds.  
3. Within two minutes, press the “Encryption” button on the new  
unit for more than 0.5 seconds, but less than three seconds.  
4. The new device has now been loaded with the network  
password and added to the current powerline network.  
resetting to factory defaults  
Using a pointed object, press and hold the “Reset” button for one  
second to restore defaults. This procedure resets the network password  
to the default out-of-box value.  
Powerline AV+ Networking Adapter  
6
 
INforMATIoN  
Table of Contents  
seCTions  
1
2
3
4
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try and correct the interference by one or  
more of the following measures:  
fCC statement  
deClArATIoN of CoNforMITY WITh fCC rUles  
for eleCTroMAgNeTIC CoMPATIbIlITY  
Reorient or relocate the receiving antenna.  
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA  
90220, declare under our sole responsibility that the products, F5D4074-S,  
to which this declaration relates, comply with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired  
operation.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Modifications  
Caution: Exposure to Radio Frequency Radiation. The radiated output  
power of this device is far below the FCC radio frequency exposure  
limits. Nevertheless, the device shall be used in such a manner that  
the potential for human contact during normal operation is minimized.  
When connecting an external antenna to the device, the antenna shall  
be placed in such a manner to minimize the potential for human contact  
during normal operation. In order to avoid the possibility of exceeding  
the FCC radio frequency exposure limits, human proximity to the antenna  
shall not be less than 20cm (8 inches) during normal operation.  
The FCC requires the user to be notified that any changes or  
modifications to this device that are not expressly approved by  
Belkin International, Inc., may void the user’s authority to operate  
the equipment.  
europe – eU declaration of Conformity  
This device complies with the essential requirements of the R&TTE  
Directive 1999/5/EC. The following test methods have been applied  
in order to prove presumption of conformity with the essential  
requirements of the R&TTE Directive 1999/5/EC:  
federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation.  
-
EN60950-1:2001 A11:2004  
Safety of Information Technology Equipment  
This equipment generates, uses, and can radiate radio frequency energy.  
If this equipment does cause harmful interference to radio or television  
Powerline AV+ Networking Adapter  
7
 
INforMATIoN  
Table of Contents  
seCTions  
1
2
3
4
What is not covered by this warranty?  
belkin International, Inc., limited 1-Year  
All above warranties are null and void if the Belkin product is not  
Product Warranty  
provided to Belkin for inspection upon Belkin’s request at the sole  
expense of the purchaser, or if Belkin determines that the Belkin product  
has been improperly installed, altered in any way, or tampered with.  
The Belkin Product Warranty does not protect against acts of God such  
as flood, earthquake, lightning, war, vandalism, theft, normal-use wear  
and tear, erosion, depletion, obsolescence, abuse, damage due to low  
voltage disturbances (i.e. brownouts or sags), non-authorized program,  
or system equipment modification or alteration.  
What this warranty covers.  
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of  
this Belkin product that the product shall be free of defects in design,  
assembly, material, or workmanship.  
What the period of coverage is.  
Belkin warrants the Belkin product for one year.  
how to get service.  
To get service for your Belkin product you must take the following steps:  
What will we do to correct problems?  
Product Warranty.  
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA  
90220, Attn: Customer Service, or call (800)-223-5546, within 15 days  
of the Occurrence. Be prepared to provide the following information:  
Belkin will repair or replace, at its option, any defective product  
free of charge (except for shipping charges for the product). Belkin  
reserves the right to discontinue any of its products without notice,  
and disclaims any limited warranty to repair or replace any such  
discontinued products. In the event that Belkin is unable to repair or  
replace the product (for example, because it has been discontinued),  
Belkin will offer either a refund or a credit toward the purchase of  
another product from Belkin.com in an amount equal to the purchase  
price of the product as evidenced on the original purchase receipt as  
discounted by its natural use.  
a. The part number of the Belkin product.  
b. Where you purchased the product.  
c. When you purchased the product.  
d. Copy of original receipt.  
Powerline AV+ Networking Adapter  
8
 
INforMATIoN  
Table of Contents  
seCTions  
1
2
3
4
2. Your Belkin Customer Service Representative will then  
instruct you on how to forward your receipt and Belkin  
product and how to proceed with your claim.  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,  
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH  
AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING  
OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Belkin reserves the right to review the damaged Belkin product. All costs  
of shipping the Belkin product to Belkin for inspection shall be borne  
solely by the purchaser. If Belkin determines, in its sole discretion, that  
it is impractical to ship the damaged equipment to Belkin, Belkin may  
designate, in its sole discretion, an equipment repair facility to inspect  
and estimate the cost to repair such equipment. The cost, if any, of  
shipping the equipment to and from such repair facility and of such  
estimate shall be borne solely by the purchaser. Damaged equipment  
must remain available for inspection until the claim is finalized. Whenever  
claims are settled, Belkin reserves the right to be subrogated under any  
existing insurance policies the purchaser may have.  
This warranty gives you specific legal rights, and you may also have  
other rights, which may vary from state to state. Some states do not  
allow the exclusion or limitation of incidental, consequential, or other  
damages, so the above limitations may not apply to you.  
how state law relates to the warranty.  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.  
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS  
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY  
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,  
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.  
Some states do not allow limitations on how long an implied warranty  
lasts, so the above limitations may not apply to you.  
Powerline AV+ Networking Adapter  
9
 
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective  
manufacturers listed. Windows is either a registered trademark or trademark of Microsoft Corporation in  
the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the U.S. and other  
countries. HomePlug is a trademark of the HomePlug Alliance, registered in the U.S. and other countries.  
 

Beko Washer Dryer WCB 77087 User Manual
Binatone GPS Receiver TTGO121 User Manual
Black Box Outboard Motor Black Box User Manual
Blanco Indoor Furnishings 157 086 User Manual
Bosch Appliances Washer WAS24460UC User Manual
Bradford White Corp Water Heater 238 37281 00R User Manual
Braun Electric Shaver TYPE 5375 User Manual
Brother Printer 5140 User Manual
Canon Camcorder ZR600 User Manual
Casio Digital Camera EX H15 User Manual