Belkin Network Card F5U219 User Manual

Belkin USB  
2.0 Dual-Port  
PCI Card  
P73941  
F5U219  
 
Introduction  
Welcome to Belkin USB 2.0!  
Thank you for purchasing the Belkin USB 2.0  
Dual-Port PCI Card (the PCI Card).  
Now you can upgrade your computer to the latest  
USB technology. You will be able to take advantage  
of a host of new high-speed USB 2.0 products! Your  
USB 2.0 products—including hard drives, scanners,  
printers, video cameras, and more—will all work much  
faster than ever before. Your current USB devices will  
continue to work as they always have, and in some  
cases even better with this PCI Card. Follow the  
simple installation instructions in this manual to get  
your PCI Card up and working—then enjoy the speed  
and convenience of USB!  
1
 
Features  
Three USB host controllers integrated into a single PCI  
Card—one providing 480Mbps of USB bandwidth and  
two providing 12Mbps of USB bandwidth  
•2 high-speed USB ports  
Simultaneous connection capability for low-, full-, and  
high-speed devices  
Auto-detection of new devices as they are connected,  
along with the speed of each device  
Backward-compatibility with USB 1.1 devices  
Full compliance with USB specifications  
Plug-and-Play technology  
Specifications  
Open Host Controller Interface- (OHCI-) compliant  
(USB 1.1 Host Controller)  
EHCI-compliant (USB 2.0 Host Controller)  
PCI revision 2.1-compliant  
Current: 500mA per port  
USB revision 2.0-compliant  
2
 
Package Contents  
Belkin USB 2.0 Dual-Port PCI Card  
User Manual  
Installation CD  
System Requirements  
PC-compatible computer with available PCI slot  
Windows® 98 SE, 2000, Me, or XP operating system  
3
 
Operating System Compatibility  
Operating System  
USB 1.x  
Support  
USB 2.0  
Support  
Windows 98 SE  
Windows 2000  
Windows Me  
Windows XP  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
USB 2.0 Dual-Port PCI Card Description  
Figure 1  
4
 
Installation  
Please refer to the section that corresponds to your  
version of the Windows operating system (OS).  
Installation Procedure for Windows 98 SE OS  
This installation procedure will successfully install two  
USB 1.1 host controllers and a single USB 2.0  
enhanced host controller.  
1. Ensure that your computer is powered down.  
2. Locate an available PCI slot on your computer.  
3. Insert the PCI Card into the slot. Apply enough  
pressure to ensure that it is fully seated.  
4. Insert the Belkin USB 2.0 driver installation CD into  
your computer’s CD-ROM drive.  
5. Turn on power and boot-up the computer.  
6. The Windows OS will recognize the PCI Card as a  
“NEC USB Open Host Controller” and the “Add  
New Hardware Wizard” dialog box will open. Click  
“Next”.  
7. Select “Search for the best driver for your device”  
and click “Next”.  
8. Uncheck all the boxes and click “Next”.  
5
 
Installation (continued)  
9. The Windows OS will find the drivers for “NEC USB  
Open Host Controller”. Click “Next”.  
10. The Windows OS may ask you for the Windows OS  
installation CD. If prompted to, insert the CD  
into the CD-ROM drive and follow the  
subsequent instructions.  
11. After the Windows OS installs the required drivers,  
installation of the first host controller is complete.  
Click “Finish”.  
12. The “Add New Hardware” wizard will repeat the  
installation process for the second OHCI host  
controller.  
13. Repeat steps 7-11.  
14. After installation of the two OHCI host controllers,  
the Windows OS will detect “PCI Universal Serial  
Bus”. This is the USB 2.0 EHCI host controller.  
15. The “Add New Hardware Wizard” dialog box will  
open. Click “Next”.  
16. Select “Search for the best driver for your device”  
and click “Next”.  
17. Check the “CD-ROM drive” box. Click “Next”.  
18. The Windows OS will locate the driver for “Belkin  
USB 2.0 Hi-Speed Host Controller”. Click “Next”.  
6
 
Installation (continued)  
19. The Windows OS will now install the F5U219  
enhanced host controller driver. Click “Finish”.  
20. After installation of the USB host controllers, the  
Windows OS will detect “USB Root Hub” and  
automatically install the required driver support. This  
will repeat for each of the two USB OHCI  
host controllers.  
Installation of the PCI Card is now complete.  
Verifying Proper Installation (Windows 98/98 SE OS)  
Check the “Windows Device Manager” to confirm that  
your PCI Card has been properly installed.  
1. Right-click on “My Computer” and select  
“Properties”.  
2. Select the “Device Manager” tab.  
3. Click on the plus sign (+) next to “Universal Serial  
Bus Controllers”.  
The “Device Manager” list will now include two “NEC  
USB Open Host Controller” entries, one “Belkin USB  
2.0 Hi-Speed Host Controller” entry, and two additional  
“USB Root Hub” entries.  
7
 
Installation (continued)  
Installation Procedure for Windows 2000 OS  
This installation procedure will successfully install two  
USB OHCI host controllers and a single USB 2.0  
enhanced host controller.  
1. Locate an available PCI slot on your computer.  
2. Insert the PCI Card into the slot. Apply pressure as  
needed until it is fully seated.  
3. Insert the Belkin USB 2.0 driver installation CD into  
your computer’s CD-ROM drive.  
4. After installing the PCI Card, turn on the computer.  
5. After loading, the Windows 2000 OS will detect  
“NEC PCI to USB Open Host Controller”. The  
required driver support will be automatically  
installed. No user input is required. This will repeat  
one more time.  
6. The Windows OS will detect “Universal Serial Bus  
(USB) Controller”. This is the USB 2.0 EHCI host  
controller. The “Found New Hardware Wizard”  
window will appear. Select “Search for a suitable  
driver for my device (recommended)” and  
click “Next”.  
8
 
Installation (continued)  
7. A new “Found New Hardware Wizard” window  
will open. Check the “CD-ROM drive” box.  
Click “Next”.  
8. The Windows OS will find “Belkin USB 2.0  
Hi-Speed Host Controller”. Click “Next”.  
9. The Windows OS will now install the “Enhanced  
Host Controller” driver. Click “Finish”.  
10. Installation of the USB 2.0 Dual-Port PCI Card is  
now complete.  
Verifying Proper Installation (Windows 2000 OS)  
After installation, check the Windows OS’s  
Device Manager to confirm that the PCI Card has  
been installed.  
1. Right-click on “My Computer”.  
2. Select “Properties”.  
3. Select the “Hardware” tab and click on the  
"Device Manager" button.  
4. Click the plus sign (+) next to “Universal Serial  
Bus Controllers”.  
The “Device Manager” list will now include two “NEC  
USB Open Host Controller” entries, one “Belkin USB  
2.0 Hi-Speed Host Controller” entry, and two  
additional “USB Root Hub” entries.  
9
 
Installation (continued)  
Installation Procedure for Windows Me OS  
This installation procedure will successfully install two  
USB OHCI host controllers and a single USB 2.0  
enhanced host controller.  
1. Locate an available PCI slot on your computer.  
2. Insert the PCI Card into the slot. Apply pressure as  
needed until it is fully seated.  
3. Insert the Belkin USB 2.0 driver installation CD into  
your computer’s CD-ROM drive.  
4. After installing the PCI Card, turn on your  
computer.  
5. After loading, the Windows OS will detect “NEC  
USB Open Host Controller (E13+)”. The required  
driver support will be automatically installed. No  
user input is required.  
6. The Windows OS will detect “PCI Universal Serial  
Bus”. This is the USB 2.0 EHCI controller. The “Add  
New Hardware Wizard” window will appear.  
7. Select “Automatic search for a better driver  
(recommended)”. Click “Next”.  
10  
 
Installation (continued)  
8. Check the “CD-ROM Drives” box. Click “Next”.  
9. The Windows OS will locate the driver for “Belkin  
USB 2.0 Hi-Speed USB Host Controller”. Click  
“Next”.  
10. The Windows OS will now install the “Belkin  
USB 2.0 Hi-Speed USB Host Controller” driver.  
Click “Finish”.  
11. The Windows OS will detect “NEC USB Open  
Host Controller (E13+)”. The required driver  
support will be automatically installed. No user  
input is required.  
12. After installation of the USB host controllers, the  
Windows OS will detect “USB Root Hub” and  
automatically install the required driver support.  
This will repeat one more time. Installation of the  
PCI Card is now complete.  
Verifying Proper Installation (Windows Me OS)  
After installation, check the Windows OS’s  
Device Manager to confirm that the PCI Card  
has been installed.  
1. Right-click on “My Computer” and select  
“Properties”.  
2. Select the “Device Manager” tab.  
3. Click on the plus sign (+) next to “Universal Serial  
Bus Controllers”.  
11  
 
Installation (continued)  
The “Device Manager” list will now include two “NEC  
USB Open Host Controller (E13+)” entries, one  
“Belkin USB 2.0 Hi-Speed Host Controller”entry, and  
two additional “USB Root Hub” entries.  
Installation Procedure for Windows XP OS  
1. Locate an available PCI slot on your computer.  
2. Insert the PCI Card into the slot. Apply pressure  
as needed until it is fully seated.  
3. Insert the Belkin USB 2.0 driver installation CD  
into your computer’s CD-ROM drive.  
4. After installing the PCI Card, turn on the  
computer.  
5. After loading, the Windows XP OS will detect  
“NEC PCI to USB Open Host Controller”. The  
required driver support will be automatically  
installed. No user input is required. This will  
repeat one more time.  
6. The Windows XP OS will detect “NEC PCI to USB  
Enhanced Host Controller”. A “New Hardware  
Wizard” window will open. With the installation  
CD in the drive, select “Next” to install the driver.  
The Windows OS may display a message  
indicating that the driver that you are installing  
has not passed “Windows Logo testing”. Click  
“Continue Anyway”.  
12  
 
Installation (continued)  
7. The Windows XP OS will detect “USB Root Hub”.  
The required driver support will be automatically  
installed. This will repeat two times.  
Installation is now complete.  
Verifying Proper Installation (Windows XP OS)  
After installation, check the Windows XP OS’s Device  
Manager to confirm that the PCI Card has been  
installed.  
1. Right-click on “My Computer”.  
2. Select “Properties”.  
3. Select the “Hardware” tab and click on the  
“Device Manager” button.  
4. Click the plus sign (+) next to “Universal Serial  
Bus Controllers”.  
The “Device Manager” list will now include two “NEC  
USB Open Host Controller” entries, one “Belkin USB  
2.0 Hi-Speed Host Controller” entry, and two  
additional “USB Root Hub” entries.  
13  
 
Information  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220,  
declare under our sole responsibility that the product:  
F5U219  
to which this declaration relates:  
Complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may  
cause undesired operation.  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F5U219, to which this  
declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with  
Generic Immunity Standard EN50082-1 1992.  
Belkin Components Limited Lifetime Product Warranty  
Belkin Components warrants this product against defects in materials and workmanship for  
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at  
no charge provided it is returned during the warranty period, with transportation charges  
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of  
purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse,  
or misapplication; if the product has been modified without the written permission of Belkin;  
or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,  
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS  
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER  
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME,  
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM  
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages  
or exclusions of implied warranties, so the above limitations of exclusions may not apply to  
you. This warranty gives you specific legal rights, and you may also have other rights that  
vary from state to state.  
 
Belkin Components  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Unit 13 • Gatelodge Close • Round Spinney  
Northampton • Northants  
NN3 8RX • United Kingdom  
Tel: +44 (0) 1604678300  
Fax: +44 (0) 1604678330  
Belkin Components B.V.  
Starparc Building • Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Belkin Components, Ltd.  
7 Bowen Cresent • West Gosford  
NSW 2250 • Australia  
Tel: +61 (2) 4372 8600  
Fax: +61 (2) 4325 4277  
© 2001 Belkin Components. All rights reserved. All trade names are registered  
trademarks of respective manufacturers listed. P73941  
 

Black Box Computer Accessories LBLPO1A KIT User Manual
Black Decker Blender BLD100 User Manual
Bosch Appliances Home Care Product F01U252722 User Manual
Bravetti Fryer F1060B User Manual
Brother Printer PT 2600 User Manual
Brunton Boating Equipment V2 PRO User Manual
Bush Hog Cultivator PT5 User Manual
Bushnell Telescope 786351ED User Manual
Casio Cordless Telephone DC5000 User Manual
Chief Manufacturing TV Mount PAC516 User Manual