4. OPERATION
The COLORstrip™ Foot Controller provides quick access to the COLORstrip’s built-in
programs, blackout function, static colors, strobe speed, and chase programs. Please
refer to the Product Overview to see the button locations on the Foot Controller.
Foot
Controller
Functions
Button
Function
This button allows the user to cycle through the stand-alone programs
in the COLORstrip™ product. You can click the button once for each of
the programs to cycle through slowly, or hold down the button to cycle
through the programs faster. For a detailed description of the programs
built into the unit, download the COLORstrip™ or COLORstrip™ Mini
User Manual. To stop the auto programs from running once Scene <1>
has been pressed, use the Blackout <4> function.
<1>
Scene
This button allows users to select the run speed (mode P.) and/or flash
speed (mode F.) of the selected program. If both speeds are available
in a given mode, both will change at the same rate unless the product
is set to custom starting values (see the COLORstrip™ User Manual
for program details). The Speed <2> button may be clicked once to
slowly cycle through individual speeds, or held down to increase
speed. The speed can be adjusted from 000~100, with two separate
corresponding values, which are dependent upon the program being
accessed (see table below).
<2>
Speed
This button allows users to quickly place the COLORstrip™ unit into
Sound-Active mode. To exit the sound function, use the Scene <1>
button to select the program you wish to activate, or Blackout the
product.
<3>
Function
This button disables all output from the unit. If the button is clicked with
the unit already in Blackout <4> mode, it will immediately resume the
last running program.
<4>
Blackout
Program
Value
Speed <2> Functions
Speed <2>
Button
Functions Table
000~099
100
Run speed increases as flash speed increases
Flash with sound, Blackout without sound
A001~A007
Slow to fast
000~050
051~100
Activates sound-active mode within these
programs; defaults to auto speed when no sound
is present.
A008~A011
A012~A020
Slow to fast
000~050
051~100
Activates sound-active mode within these
programs; defaults to auto speed when no sound
is present.
A021
A022
000~100
000~100
RGB color mixing, 000~100 for each
Color fade, slow to faster
COLORstrip™ Footswitch User Manual Rev. 3
Page 7 of 10
